Forum

blfn888
Group: Registered
Joined: 2018/09/29
New Member

About Me

Parameters
Movement alert 1 Move123456 Move ok
Movement alert 2 Nomove123456 Cancel move ok
Overspeed alert 1 Speed123456 080 Speed ok
Overspeed alert 2 Nospeed123456 Cancel speed ok
Geo fence alert1 Stockade123456 coordinate;coordinate
Geo fence alert 2 Nostockade123456 Cancel stockade ok
Restart tracker Reboot123456 System will reboot
Enquiry position Position GPS info
Auto track 1 At30sum5 Auto track set ok
Auto track 2 Noat123456 Cancel auto track ok
Set call response 1 Tracker123456 Tracker ok
Set call response 2 Monitor123456 Monitor ok
Set auto track mode 1 Telephone123456 Set telephone OK
Set auto track mode 2 Web123456 Set web ok
Instructions:
GPS tracker with video Setting the electronic fence can limit the operating range of the device. Once the device is running beyond the setting range, the device will automatically send the information back to the authorization number.
GPS tracker with video Set: When the car stays in a place for 3-10 minutes, you will be able to send SMS instructions "stockade + password + space + latitude, longitude; latitude, longitude" to the device to set a limited range, once the device is out The device will send the message "stockade! + Latitude and longitude" to the authorization number.
Note: The first latitude and longitude is the coordinates of the upper left corner, the second latitude and longitude is the coordinates of the lower right corner. Once the limit is exceeded, the device will send an alarm message every 3 minutes.
GPS tracker with video Cancel Settings: Send SMS command "nostockade + password" to cancel this function setting.
5. Shift alarm
Set: When the device stays in a place for 3-10 minutes, you can send the SMS command "move + password" to the device, and the device will reply "move ok!" Once the device is out of range (the device default distance is 200 meters) , The device will reply to the message "move + latitude and longitude" to the authorization number. Once the limit is exceeded, the device will send an alarm message every 3 minutes.
Cancel Settings: Send SMS "nomove + password" to cancel this feature setting.
6 speed alarm
Set the message: send the SMS command "speed + password + space +080" to the device (assuming the speed is 80km / h), then the device will reply "speed ok!". When the device runs faster than 80km / h, this device will send the message " speed + 080! + latitude and longitude "to the authorization number on. The device will send an alarm message every 3 minutes
Cancel Settings: Send SMS "nospeed + password" to cancel this feature setting.
Note: Speed alarm is recommended to set the speed of 30 km / hour or more, if the speed is too low may result in GPS signal drift and not accurate enough.
Off the oil off
1 send the SMS command "stop + password" to the vehicle terminal of the device. After receiving the instruction, the vehicle terminal will perform the oil circuit disconnection operation directly and reply to "Stop engine Succeed". Once the vehicle terminal receives the electrical / oil disconnect command, the vehicle terminal will memorize the status until the center releases the recovery command.
2. Restore oil and electricity
Send SMS command "resume + password" to the vehicle terminal, the vehicle terminal to accept the directive, the vehicle directly to the oil circuit disconnection operation, and reply to "Resume engine Succeed". Once the vehicle terminal has been disconnected from the vehicle, the vehicle terminal will remember the status until the center releases the recovery command. low price Multifunction GPS
website:http://www.gpstrackingfactory.com/gps-tracker/multifunction-gps/

Social Networks
Member Activity
0
Forum Posts
0
Topics
0
Questions
0
Answers
0
Question Comments
0
Liked
0
Received Likes
0/10
Rating
0
Blog Posts
0
Blog Comments
Share: